Five minute job….

Okay, the task wasn’t supposed to take ‘five minutes’ it was suppose to take about an hour. We were running late, but still, we had time. I fired up the software to prepare the ‘cheap and cheerful’ DVD. I say ‘cheap and cheerful’ but of course this would be used at the ‘Premier’ showing of this programme, so I wanted the best quality that I could get.

The job began running at five o’clock in the afternoon and chugged merrily along for forty minutes reaching 89% when it crashed. The error message helpfully said the ‘bit rate was too high’.

Ah, okay, whatever that means. I deleted all the content, reset the parameters, lowering the bit rate, reloaded the content, recreated the menu and set it to work again.

All seemed to be working well, so we left for a meal thinking that the job would be finished on our return. We could then check it and make sure that all was well, that there were no errors or problems – a bit later than planned, but still within spec.

Back from the delightful meal to find the programme had failed again – with the same helpful error message.

Once again I deleted all the content, changed the parameters, I was sure that the lower number was supposed to be 4.6. This set, loaded the video again, set the menu and set the programme to work.

We passed 89% with no problem. Smiles all around.

Crashed at 93%.

Once more to the breech my friends. Deleted the material, set the parameters quite a bit lower, both upper and lower values, changed the way it did the encoding and then loaded the video, recreated the menu and set it off again.

Why oh why do they allow you to set parameters that can not work ?

About an hour later, success ! Happy day !

Popped the disk out and went to test it on the DVD player and telly.

Sat down and to enjoy the programme, the fruit of not weeks or months, but years of labour. All flowed nicely along until the 25th minute (programme is 29 minutes long). There we had a graphic that has worked flawlessly during the previous twelve versions – but here on version 13 the first half worked as expected and then, in the second half, all the words piled over to the left hand side.

It’s not supposed to do that ! It has never done that before !

Well, it has now.

So back to the computer, fire up the editing software, find the 25th minute and sure enough it is not right.

How ? Why ?

Without a ‘how’ or a ‘why’ – how do you fix it ? Conundrum, but it has to be fixed.

Well, I poked and prodded and didn’t make any change but now it works ! Hm, welcome to my world. These things happen.

It seems that earlier in the day, making the last adjustments, we made a minor adjustment to one end of this segment. We moved a file, an invisible file that had no bearing on the graphic, three frames, uh, about 1/9 of a second (yes, second) and that minor, minuscule adjustment sent the compilation into a apoplexy.

But now it is fixed. So, make a new master .mov file, only six or seven minutes for that, then load that in the software to make the DVD and about an hour later it will be ready.

Old material deleted, new material loaded, the programme ran – no changes required to the encoding settings and sure enough, about an hour later the disk popped out.

Great. But, once again, must sit down and watch the whole programme to ensure that it all works – no undocumented surprises lurking in the shadows. This is, after all, the premier copy.

So half an hour later – job done.

But this one hour job has consumed seven hours, and, unfortunately we need three copies (just in case) plus a copy with time codes emblazoned on it to facilitate the Director to make the final adjustments before we call it complete.

And so, a grand total of eight hours later – it is now one in the morning and, finally I can say the task is done.

In my world there is no such thing as a ‘five minute job’.

Welcome to my world….

The smell of burning hair… that was a clue…

Sometimes people lament and say that what is taught in school doesn’t actually prepare us for life. I disagree.

At school I learned how to read, I still do it. I often do it for pleasure. Reading opens many doors and I can find encouragement, instruction, enlightenment and humour.  Reading was good thing to learn.

I consider myself numerate. Not every one is. I can do basic mathematics and whilst I do not begin to understand trigonometry or physics I can handle money, and plan and build various projects. Numeracy was also a positive thing to learn.

Then there was a class that tried to explain electricity to me. Now, I never really got it and even recently I was reading an article that was trying to explain the wonder of moving electrons – but I still don’t get it. What I did get was an understanding of wiring – how to connect wires and switches and plugs to the mains and make it work. I know nothing compared to an electrician and I am ignorant of the building code for wiring – but in a pinch, I can wire things together and they will work. Electricity was a good thing to learn.

Well I remember, being one of three boys in a class full of girls learning to type. It wasn’t consider ‘manly’ in those days but learning to type has set me free so when I write, my mind is on what I am tying to say and not on how to find the keys on the keyboard. Liberating. Typing was a great thing to learn.

At some point I was in a class that introduced us to the art of welding. There were many of us, the theory was explained and we all had a go at it. We didn’t do much – but we were exposed to the wonders of using an arc welder.

Labour used to be cheap here – and in some ways it still is. But if you are short of the readies, even cheap can be out of reach. Hence I’ve learned to put my hand to painting, laying Ytong blocks, tiling, wiring, plumbing, plastering, oh, and yes, welding.

The welding job I was charged to do was non load bearing steel to form a frame for some plastic windows to be installed. We aren’t talking rocket science, initially less than a dozen places needing welding. A competent welder could do the task in an hour or so and all would be straight and true.

I had understood that my friend and I had agreed to call a plumber we know – who is also a welder – to come and do the deed. We would provide the grunt labour and he would do the delicate work on the cheap. Ah, it seems I did not understand…

We had the steel cut and delivered, and whilst I was awaiting the call for the plumber, I got the ‘call’ to weld it together.  It seems that I am cheaper than ‘on the cheap’.

Now one or two lessons some forty five years ago is not a lot to be getting on with.

I have been told that a single spot weld is very strong and how hard can it be? To the professional welder, nothing is simpler.

And so welding rod in my hand I began. Weld, weld, weld, smoke pouring away, sparks flying every which way, molten steel dripping – all is looking good. After the smoke had cleared, and as I have observed, proper welders will hammer and scrape and clean the weld, and so too did I.

When all the dross was removed, when it was clear, not a single spot weld – nothing is holding. Much was twisted and gnarled lumps of melted metal were clumped together or imitating a congealed lump of unspeakable, but therer was not a single weld binding the two pieces of metal together. All the welding, sparking, smoking and dripping had been in vain.

Trail and error – learn by doing – perseverance, dogged determination whatever you want to call that tenacity of spirit or just plain stubbornness is required.

The first stage was to assemble the outer frame – after a fashion, done. The second stage was to fit it into place. Now welding the frame in the courtyard I was standing on the ground and the welds were on the floor. Now the frame was in place and I had to weld the top of the frame to some overhead steel. Now I am below and the welding is above.

Let the reader pause and imagine.

To weld you have to ‘complete the circuit’. That is you have to provide a path from the welder through one lead to the electrode and when in near contact with the metal, the current flows back to the welder via the other lead which is attached to the metal frame somewhere. Where the electricity leaves the electrode it flies through the air, or arcs through the air (hence an arc welder) and the result is you get great heat, hot enough to melt metal – this is the business end of welding. The other lead provides the completion of the path back to the welder. You have to have a complete path for the electricity to do it’s thing.

I learned a couple of new things. As I am a novice at welding, sometimes the electrode sticks to the metal, melting and forming a bond with the metal. This is not good. So I try to pull the electrode away and break the connection. Now, for a solid piece of metal, that some times works. But sometime not. When it doesn’t work, I disconnect the electrode from the handle, grab the electrode pry it off the metal and reposition it in the handle.

Now I learned that if I sit on the metal frame, and if the weather is hot (and it is) and I am perspiring (and I was), that when I grab the electrode and attempt to put it in the handle that I can complete the circuit using my hand and bottom. That was a valuable thing to learn, but not fun.

Welding above your head has some additional challenges. Molten globs of metal tend to fall downwards – I’ve noticed this. Now workmen wear steel toed boots. As I don’t have steel toed sandals, I learned that the little bits of red hot metal tends to go right though my protective socks. Another of those unpleasant lessons.

With the welding above, there is a veritable shower of sparks, smoke and burning globules of dross or molten steel cascading down in a relentless stream. If there is no breeze, all falls basically straight down and you can keep out of the way. Ah, but there is a breeze and a strong one at that everything goes but one way.

The best place to be is up wind – but that would place me on the other side of the wall and there is a significant drop to the courtyard below. The worst place to be is downwind – where there is actually a place to stand and do the task.

It is in this rather necessary but undesirable placement that I attempted the remaining welds, above my head, trying to weld where the need is, in a way that actually binds the metal together.

I press on, the welding rod burning away, sparks and smoke swarming and ever so often the very distinct smell of burning hair. It is either my hair or my beard – something hot landing where I do not wish and singeing it’s way through.

I guess that is the clue that of all the things I learned in school, maybe welding just wasn’t one of them.

Wimp !

Normally I would not consider myself a wimp. I may not be Tarzan or some other he-man, but I consider myself a ‘man’ if you know what I mean.

We had special guests coming. When I say ‘we’, I mean our house partners were having guests and as we share the courtyard and terrace their guests are in part ‘our’ guests.

Therefore we, that is the wife and I, were working on sprucing up the communal areas; you know the normal, cleaning and painting that sort of thing – nothing clever or challenging.

Okay, painting the top of the stairwell, precariously perched on very little, over a three metre plus drop to the concrete, was a bit challenging. I suppose the painting on the roof over the stairs was also a challenge having to step in the right place the forfeit being a rather dramatic descent four plus metres to the concrete below. I did rather well on the roof until I tried to leave the tricky bit for the more substantial roof when the solid, firm, trustworthy substantial roof gave way under my manly weight and my foot plunged through with a violent impact on the less substantial roof which didn’t break. Okay, it was dented and unhappy with me, but it didn’t break unlike the substantial roof, the edge of which was clearly broken. The paint in my hand had a nice flight and landed on the substantial roof – well, it needed painting anyway.

I walked on the substantial roof with far more delicacy and respect – if it let me down once, it could do it again. Maybe tip-toeing on the substantial roof wasn’t very manly – and although crashing through the roof with splintered roofing material and paint flying every which way may have looked a manly thing to do, I wished to refrain.

Some of the painting required standing on a… well the Turkish word is ‘eşek’ which means ‘donkey’, but I wasn’t standing on a donkey per se, it was a large (and heavy) plank of wood. At one end it rested on our tall ladder, near the top, and at the other at the top of our number two ladder. The plank is long and in the middle, in its former life in the house, there were two large nails driven into it, now there are only holes – splintered and gaping holes. Not the most comforting thing when you are standing in the middle, two meters off the cement floor, painting and the action of painting is causing a bouncing motion.

“Hmm,” says I, “will this action encourage the eşek to part company in the middle….”

Everything was going well. I painted. I plastered. I fitted a light and a switch in the wood store and another one under the opposite stairs.

The problem came with the cleaning. Now I am not saying this to get out of cleaning. Cleaning is good – there is a certain satisfaction of starting with a mess and cluttered area and ending with a clean and orderly space. The problem is you need to use the broom.

Now it doesn’t sound like a challenge does it?

Only a wimp would have trouble with a wee broom.

But there you have it. I grabbed the broom to commence sweeping and the pain was immediately apparent. I thought it would pass. It didn’t. I wanted to let go of the broom. I did.

The broom is not special. It is a normal, cheap, standard broom with a plastic head and plastic bristles. The handle is made up of a light weight, hollow metal tube. It was left in the courtyard – awaiting the time I would use it.

Lying there, minding it’s own business, doing nothing clever, enjoying the sun, soaking up the rays, tanning if you will.

It was the ‘soaking up of the rays’ that was causing my discomfort. The handle was, well, too hot to handle. I didn’t think I was a wimp, but I can’t hold a broom!

Wow!

So I decided to move the ladder so as to be ready to clean under where it stood when the broom, now sequestered in the shade should cool off somewhat and the handle become handleable. I walk over to the tall ladder – and it is tall. I grasp the ladder in two hands. Or should I say, I grasp the aluminium ladder that has been basking in the sun with my two hands.

I didn’t take it far. It, too, had been ‘soaking up the rays’. It, too, had a way of communicating with my hands that was hard to ignore. Very hard to ignore. It too was too hot to handle.

Okay, maybe I am a wimp.